Siemens sinamics dcp - r8892.0...15 BO: IF2 PZD3 receive bit-serial; IF2 PZD3 recv bitw; r8893.0...15 BO: IF2 PZD4 receive bit-serial; IF2 PZD4 recv bitw

2 Parameters
2.2 List of parameters
SINAMICS DCP
214 List Manual (LH21), 05/2016
Description: Binector output for bit-serial interconnection of PZD3 received via interface 2.
Dependency: Refer to: r8850
Note: IF2: Interface 2
Description: Binector output for bit-serial interconnection of PZD4 (normally control word 2) received via interface 2.
Dependency: Refer to: r8850
Note: IF2: Interface 2
r8892.0...15 BO: IF2 PZD3 receive bit-serial / IF2 PZD3 recv bitw
DCP_CTRL Can be changed: - Access level: 3
Data type: Unsigned16 Func. diagram: 2485, 9204,
9206
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
00 Bit 0 ON OFF -
01 Bit 1 ON OFF -
02 Bit 2 ON OFF -
03 Bit 3 ON OFF -
04 Bit 4 ON OFF -
05 Bit 5 ON OFF -
06 Bit 6 ON OFF -
07 Bit 7 ON OFF -
08 Bit 8 ON OFF -
09 Bit 9 ON OFF -
10 Bit 10 ON OFF -
11 Bit 11 ON OFF -
12 Bit 12 ON OFF -
13 Bit 13 ON OFF -
14 Bit 14 ON OFF -
15 Bit 15 ON OFF -
r8893.0...15 BO: IF2 PZD4 receive bit-serial / IF2 PZD4 recv bitw
DCP_CTRL Can be changed: - Access level: 3
Data type: Unsigned16 Func. diagram: 2485, 9204,
9206
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
00 Bit 0 ON OFF -
01 Bit 1 ON OFF -
02 Bit 2 ON OFF -
03 Bit 3 ON OFF -
04 Bit 4 ON OFF -
05 Bit 5 ON OFF -
06 Bit 6 ON OFF -
07 Bit 7 ON OFF -
08 Bit 8 ON OFF -
09 Bit 9 ON OFF -
10 Bit 10 ON OFF -
11 Bit 11 ON OFF -
12 Bit 12 ON OFF -
13 Bit 13 ON OFF -
14 Bit 14 ON OFF -
15 Bit 15 ON OFF -