4 Faults and alarms
4.2 List of faults and alarms
SINAMICS DCP
476 List Manual (LH21), 05/2016
Remedy: - carry out a POWER ON.
- when a component is replaced, the same component type and if possible the same firmware version should be
used.
- when a cable is replaced, only cables whose length is the same as or as close as possible to the length of the
original cables should be used (ensure compliance with the maximum cable length).
F40000 Fault at DRIVE-CLiQ socket X100
Drive object: CU_DCP, TM150, TM15DI_DO, TM31
Cause: A fault has occurred at the drive object at the DRIVE-CLiQ socket X100.
Fault value (r0949, interpret decimal):
First fault that has occurred for this drive object.
Remedy: Evaluate the fault buffer of the specified object.
F40001 Fault at DRIVE-CLiQ socket X101
Drive object: CU_DCP, TM150, TM15DI_DO, TM31
Cause: A fault has occurred at the drive object at the DRIVE-CLiQ socket X101.
Fault value (r0949, interpret decimal):
First fault that has occurred for this drive object.
Remedy: Evaluate the fault buffer of the specified object.
F40002 Fault at DRIVE-CLiQ socket X102
Drive object: TM150, TM15DI_DO, TM31
Cause: A fault has occurred at the drive object at the DRIVE-CLiQ socket X102.
Fault value (r0949, interpret decimal):
First fault that has occurred for this drive object.
Remedy: Evaluate the fault buffer of the specified object.
F40003 Fault at DRIVE-CLiQ socket X103
Drive object: TM150, TM15DI_DO, TM31
Cause: A fault has occurred at the drive object at the DRIVE-CLiQ socket X103.
Fault value (r0949, interpret decimal):
First fault that has occurred for this drive object.
Remedy: Evaluate the fault buffer of the specified object.
F40004 Fault at DRIVE-CLiQ socket X104
Drive object: TM150, TM15DI_DO, TM31
Cause: A fault has occurred at the drive object at the DRIVE-CLiQ socket X104.
Fault value (r0949, interpret decimal):
First fault that has occurred for this drive object.
Remedy: Evaluate the fault buffer of the specified object.
F40005 Fault at DRIVE-CLiQ socket X105
Drive object: TM150, TM15DI_DO, TM31
Cause: A fault has occurred at the drive object at the DRIVE-CLiQ socket X105.
Fault value (r0949, interpret decimal):
First fault that has occurred for this drive object.
Remedy: Evaluate the fault buffer of the specified object.
A40100 Alarm at DRIVE-CLiQ socket X100
Drive object: CU_DCP, TM150, TM15DI_DO, TM31
Cause: An alarm has occurred at the drive object at the DRIVE-CLiQ socket X100.
Alarm value (r2124, interpret decimal):
First alarm that has occurred for this drive object.
Remedy: Evaluate the alarm buffer of the specified object.
To Next Page
Loading...
