Siemens sinamics dcp - r4725[0...1] Trace data type 1 traced; Trace rec type 1; r4726[0...1] Trace data type 2 traced; Trace rec type 2; r4727[0...1] Trace data type 3 traced; Trace rec type 3; r4728[0...1] Trace data type 4 traced; Trace rec type 4

2 Parameters
2.2 List of parameters
SINAMICS DCP
164 List Manual (LH21), 05/2016
Description: Displays the recorded data type 1 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the recorded data type 2 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the recorded data type 3 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the recorded data type 4 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the number of traced values for each signal.
Index: [0] = Trace 0
[1] = Trace 1
Dependency: Only valid when p4705 = 4.
Description: Selects the first signal to be traced.
r4725[0...1] Trace data type 1 traced / Trace rec type 1
CU_DCP Can be changed: - Access level: 3
Data type: Unsigned32 Func. diagram: -
Min Max Factory setting
- - -
r4726[0...1] Trace data type 2 traced / Trace rec type 2
CU_DCP Can be changed: - Access level: 3
Data type: Unsigned32 Func. diagram: -
Min Max Factory setting
- - -
r4727[0...1] Trace data type 3 traced / Trace rec type 3
CU_DCP Can be changed: - Access level: 3
Data type: Unsigned32 Func. diagram: -
Min Max Factory setting
- - -
r4728[0...1] Trace data type 4 traced / Trace rec type 4
CU_DCP Can be changed: - Access level: 3
Data type: Unsigned32 Func. diagram: -
Min Max Factory setting
- - -
r4729[0...1] Trace number of recorded values / Trace rec values
CU_DCP Can be changed: - Access level: 3
Data type: Unsigned32 Func. diagram: -
Min Max Factory setting
- - -
p4730[0...5] Trace record signal 0 / Trace record sig 0
CU_DCP Can be changed: U, T Access level: 3
Data type: Unsigned32 Func. diagram: -
Min Max Factory setting
- - 0