Siemens sinamics dcp - r61000[0...239] PROFINET Name of Station; PN Name of Station; r61001[0...3] PROFINET IP of Station; PN IP of Station

2 Parameters
2.2 List of parameters
SINAMICS DCP
308 List Manual (LH21), 05/2016
Description: Displays PROFINET Name of Station.
Notice: An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.
Description: Displays PROFINET IP of Station.
r61000[0...239] PROFINET Name of Station / PN Name of Station
CU_DCP (PROFINET
CBE20)
Can be changed: - Access level: 3
Data type: Unsigned8 Func. diagram: 2410
Min Max Factory setting
- - -
r61001[0...3] PROFINET IP of Station / PN IP of Station
CU_DCP (PROFINET
CBE20)
Can be changed: - Access level: 3
Data type: Unsigned8 Func. diagram: 2410
Min Max Factory setting
- - -