Siemens sinamics dcp - r50068[0...31] Options; Options; r50069[0...31] Serial number; Serial no.; r50070[0...31] Article number; Article No.; r50071 Rated voltage; U_rated

2 Parameters
2.2 List of parameters
SINAMICS DCP
240 List Manual (LH21), 05/2016
Description: Displays the options.
Index 0: options character 1
...
Index 31: options character 32
Note: An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.
Description: Displays the serial number.
Index 0: serial number character 1
...
Index 31: serial number character 32
Note: An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.
Description: Displays the article number.
Index 0: article number character 1
...
Index 31: serial number character 32
Note: An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.
Description: Displays the rated DC current as stamped on the rating plate.
Description: Displays the rated DC current as stamped on the rating plate.
r50068[0...31] Options / Options
DCP_CTRL Can be changed: - Access level: 1
Data type: Unsigned8 Func. diagram: 6860
Min Max Factory setting
- - -
r50069[0...31] Serial number / Serial no.
DCP_CTRL Can be changed: - Access level: 1
Data type: Unsigned8 Func. diagram: 6860
Min Max Factory setting
- - -
r50070[0...31] Article number / Article No.
DCP_CTRL Can be changed: - Access level: 1
Data type: Unsigned8 Func. diagram: 6860
Min Max Factory setting
- - -
r50071 Rated voltage / U_rated
DCP_CTRL Can be changed: - Access level: 1
Data type: FloatingPoint32 Func. diagram: 6860
Min Max Factory setting
- [V] - [V] - [V]
r50072 Rated DC current / I_rated
DCP_CTRL Can be changed: - Access level: 1
Data type: FloatingPoint32 Func. diagram: 6860
Min Max Factory setting
- [A] - [A] - [A]