Siemens sinamics dcp - r4024 CO: TM15 DI;DO digital inputs 16... 23 status; TM15 D DI 16­23 St; r4025 CO: TM15 DI;DO digital inputs 16... 23 status inverted; TM15 D DI 16­23 inv; p4028 TM15 DI;DO set input or output; TM15 D DI or DO

2 Parameters
2.2 List of parameters
SINAMICS DCP
128 List Manual (LH21), 05/2016
Dependency: Refer to: r4022
Note: DI: Digital Input
DI/DO: Bidirectional Digital Input/Output
Description: Displays the status of digital inputs 16 ... 23 of Terminal Module 15 (TM15).
Dependency: Refer to: r4022, r4023, r4025
Note: DI: Digital Input
Description: Displays the inverted status of digital inputs 16 ... 23 of Terminal Module 15 (TM15).
Dependency: Refer to: r4022, r4023, r4024
Note: DI: Digital Input
Description: Sets the bidirectional digital inputs/outputs on the Terminal Module 15 (TM15) as input or output.
r4024 CO: TM15DI/DO digital inputs 16 ... 23 status / TM15D DI 16-23 St
TM15DI_DO Can be changed: - Access level: 1
Data type: Unsigned16 Func. diagram: 9402
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
00 DI/DO 16 (X522.2) ON OFF -
01 DI/DO 17 (X522.3) ON OFF -
02 DI/DO 18 (X522.4) ON OFF -
03 DI/DO 19 (X522.5) ON OFF -
04 DI/DO 20 (X522.6) ON OFF -
05 DI/DO 21 (X522.7) ON OFF -
06 DI/DO 22 (X522.8) ON OFF -
07 DI/DO 23 (X522.9) ON OFF -
r4025 CO: TM15DI/DO digital inputs 16 ... 23 status inverted / TM15D DI 16-23 inv
TM15DI_DO Can be changed: - Access level: 1
Data type: Unsigned16 Func. diagram: 9402
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
00 DI/DO 16 (X522.2) ON OFF -
01 DI/DO 17 (X522.3) ON OFF -
02 DI/DO 18 (X522.4) ON OFF -
03 DI/DO 19 (X522.5) ON OFF -
04 DI/DO 20 (X522.6) ON OFF -
05 DI/DO 21 (X522.7) ON OFF -
06 DI/DO 22 (X522.8) ON OFF -
07 DI/DO 23 (X522.9) ON OFF -
p4028 TM15DI/DO set input or output / TM15D DI or DO
TM15DI_DO Can be changed: T Access level: 1
Data type: Unsigned32 Func. diagram: 9399, 9400,
9401, 9402
Min Max Factory setting
- - 0000 0000 0000 0000 0000
0000 0000 0000 bin
Bit field: Bit Signal name 1 signal 0 signal FP
00 DI/DO 0 (X520.2) Output Input -
01 DI/DO 1 (X520.3) Output Input -
02 DI/DO 2 (X520.4) Output Input -
03 DI/DO 3 (X520.5) Output Input -
04 DI/DO 4 (X520.6) Output Input -
05 DI/DO 5 (X520.7) Output Input -
06 DI/DO 6 (X520.8) Output Input -
07 DI/DO 7 (X520.9) Output Input -
08 DI/DO 8 (X521.2) Output Input -