Siemens sinamics dcp - p54214 Battery charging characteristic hysteresis; Batt hyst; r54220 CO: Battery charging characteristic output; Batt outp; r54221 CO: Battery charging characteristic total output; Batt outp total; r54225.0...8 CO;BO: Battery charging characteristic status; Batt status

2 Parameters
2.2 List of parameters
SINAMICS DCP
280 List Manual (LH21), 05/2016
Description: Sets the hysteresis of the battery charging characteristic.
Description: Display and connector output for the output of the battery charging characteristic.
Description: Display and connector output for the output of the battery charging characteristic after manual/automatic switchover.
Description: Display and BICO output for the status of the battery charging characteristic.
Note: For bit 08:
The hysteresis range is set using p54214.
Description: Setting to test LEDs H1000 and H1010 on the mainboard.
p54214 Battery charging characteristic hysteresis / Batt hyst
DCP_CTRL Can be changed: U, T Access level: 2
Data type: FloatingPoint32 Func. diagram: 6720
Min Max Factory setting
0.00 [V] 2000.00 [V] 50.00 [V]
r54220 CO: Battery charging characteristic output / Batt outp
DCP_CTRL Can be changed: - Access level: 2
Data type: FloatingPoint32 Func. diagram: 6720
Min Max Factory setting
- [%] - [%] - [%]
r54221 CO: Battery charging characteristic total output / Batt outp total
DCP_CTRL Can be changed: - Access level: 2
Data type: FloatingPoint32 Func. diagram: 6720
Min Max Factory setting
- [%] - [%] - [%]
r54225.0...8 CO/BO: Battery charging characteristic status / Batt status
DCP_CTRL Can be changed: - Access level: 2
Data type: Unsigned16 Func. diagram: 6720
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
00 Battery charging characteristic voltage <
p54210[0]
Yes No 6720
01 Battery charging characteristic voltage <
p54210[1]
Yes No 6720
02 Battery charging characteristic voltage <
p54210[2]
Yes No 6720
03 Battery charging characteristic voltage <
p54210[3]
Yes No 6720
04 Battery charging characteristic voltage >
p54210[3]
Yes No 6720
08 Battery charging characteristic voltage in
the hysteresis range
Yes No 6720
p54985 Mainboard LED test / Mainb LED test
DCP_CTRL Can be changed: U, T Access level: 3
Data type: Unsigned16 Func. diagram: 8055
Min Max Factory setting
- - 0000 bin