Siemens sinamics dcp - r52019 CO: CUD analog input 3 result; CUD AI 3 res; r52020 CO: CUD analog input 4 raw value; CUD AI 4 raw; r52021 CO: CUD analog input 4 result; CUD AI 4 res; r52022 CO: CUD analog input 5 raw value; CUD AI 5 raw

2 Parameters
2.2 List of parameters
SINAMICS DCP
266 List Manual (LH21), 05/2016
Description: Display and connector output for the conversion result at analog input 3 (X177.1/2) on the CUD.
Note: AI: Analog Input
Description: Display and connector output for the raw value at analog input 4 (X177.3/4) on the CUD.
Dependency: Refer to: r52021
Note: AI: Analog Input
Description: Display and connector output for the conversion result at analog input 4 (X177.3/4) on the CUD.
Note: AI: Analog Input
Description: Display and connector output for the raw value at analog input 5 (X177.5/6) on the CUD.
Dependency: Refer to: r52023
Note: AI: Analog Input
Description: Display and connector output for the conversion result at analog input 5 (X177.5/6) on the CUD.
Note: AI: Analog Input
Description: Display and connector output for the raw value at analog input 6 (X177.7/8) on the CUD.
Dependency: Refer to: r52025
Note: AI: Analog Input
r52019 CO: CUD analog input 3 result / CUD AI 3 res
DCP_CTRL Can be changed: - Access level: 3
Data type: FloatingPoint32 Func. diagram: 2085
Min Max Factory setting
- [%] - [%] - [%]
r52020 CO: CUD analog input 4 raw value / CUD AI 4 raw
DCP_CTRL Can be changed: - Access level: 3
Data type: FloatingPoint32 Func. diagram: 2085
Min Max Factory setting
- [%] - [%] - [%]
r52021 CO: CUD analog input 4 result / CUD AI 4 res
DCP_CTRL Can be changed: - Access level: 3
Data type: FloatingPoint32 Func. diagram: 2085
Min Max Factory setting
- [%] - [%] - [%]
r52022 CO: CUD analog input 5 raw value / CUD AI 5 raw
DCP_CTRL Can be changed: - Access level: 3
Data type: FloatingPoint32 Func. diagram: 2090
Min Max Factory setting
- [%] - [%] - [%]
r52023 CO: CUD analog input 5 result / CUD AI 5 res
DCP_CTRL Can be changed: - Access level: 3
Data type: FloatingPoint32 Func. diagram: 2090
Min Max Factory setting
- [%] - [%] - [%]
r52024 CO: CUD analog input 6 raw value / CUD AI 6 raw
DCP_CTRL Can be changed: - Access level: 3
Data type: FloatingPoint32 Func. diagram: 2090
Min Max Factory setting
- [%] - [%] - [%]