Siemens sinamics dcp - p4035 BI: TM15 DI;DO signal source for terminal DI;DO 5; TM15 D S_src DI;DO5; p4036 BI: TM15 DI;DO signal source for terminal DI;DO 6; TM15 D S_src DI;DO6; p4037 BI: TM15 DI;DO signal source for terminal DI;DO 7; TM15 D s_src DI;DO7; p4038 BI: TM15 DI;DO signal source for terminal DI;DO 8; TM15 D s_src DI;DO8

SINAMICS DCP
List Manual (LH21), 05/2016
131
2 Parameters
2.2 List of parameters
Description: Sets the signal source for terminal DI/DO 5 (X520.7) of Terminal Module 15 (TM15).
Note: Prerequisite: The DI/DO must be set as an output (p4028.5 = 1).
DI/DO: Bidirectional Digital Input/Output
Description: Sets the signal source for terminal DI/DO 6 (X520.8) of Terminal Module 15 (TM15).
Note: Prerequisite: The DI/DO must be set as an output (p4028.6 = 1).
DI/DO: Bidirectional Digital Input/Output
Description: Sets the signal source for terminal DI/DO 7 (X520.9) of Terminal Module 15 (TM15).
Note: Prerequisite: The DI/DO must be set as an output (p4028.7 = 1).
DI/DO: Bidirectional Digital Input/Output
Description: Sets the signal source for terminal DI/DO 8 (X521.2) of Terminal Module 15 (TM15).
Note: Prerequisite: The DI/DO must be set as an output (p4028.8 = 1).
DI/DO: Bidirectional Digital Input/Output
Description: Sets the signal source for terminal DI/DO 8 (X541.2) of Terminal Module 31 (TM31).
Note: Prerequisite: The DI/DO must be set as an output (p4028.8 = 1).
DI/DO: Bidirectional Digital Input/Output
Description: Sets the signal source for terminal DI/DO 9 (X521.3) of Terminal Module 15 (TM15).
p4035 BI: TM15DI/DO signal source for terminal DI/DO 5 / TM15D S_src DI/DO5
TM15DI_DO Can be changed: U, T Access level: 1
Data type: Unsigned32 / Binary Func. diagram: 9400
Min Max Factory setting
- - 0
p4036 BI: TM15DI/DO signal source for terminal DI/DO 6 / TM15D S_src DI/DO6
TM15DI_DO Can be changed: U, T Access level: 1
Data type: Unsigned32 / Binary Func. diagram: 9400
Min Max Factory setting
- - 0
p4037 BI: TM15DI/DO signal source for terminal DI/DO 7 / TM15D s_src DI/DO7
TM15DI_DO Can be changed: U, T Access level: 1
Data type: Unsigned32 / Binary Func. diagram: 9400
Min Max Factory setting
- - 0
p4038 BI: TM15DI/DO signal source for terminal DI/DO 8 / TM15D s_src DI/DO8
TM15DI_DO Can be changed: U, T Access level: 1
Data type: Unsigned32 / Binary Func. diagram: 9401
Min Max Factory setting
- - 0
p4038 BI: TM31 signal source for terminal DI/DO 8 / TM31 S_src DI/DO8
TM31 Can be changed: U, T Access level: 1
Data type: Unsigned32 / Binary Func. diagram: 9549, 9560
Min Max Factory setting
- - 0
p4039 BI: TM15DI/DO signal source for terminal DI/DO 9 / TM15D s_src DI/DO9
TM15DI_DO Can be changed: U, T Access level: 1
Data type: Unsigned32 / Binary Func. diagram: 9401
Min Max Factory setting
- - 0
Siemens Parts