Siemens sinamics dcp - p54142 CI: Voltage controller negative current limit signal source; U_ctr I_lim negS_s; p54145 BI: Voltage controller enable signal source; U_ctrl enab s_src; p54146 Voltage controller DC link buffering minimum time; U_ctrl Vdc t_min; p54200 CI: Battery charging char. manual current setpoint signal source; Batt man I_s s_src

2 Parameters
2.2 List of parameters
SINAMICS DCP
278 List Manual (LH21), 05/2016
Description: Sets the signal source for the negative current limit of the voltage controller.
Description: Sets the signal source to enable the voltage controller.
Description: Sets the minimum time to enable the voltage controller for the "DC link buffering" function.
Dependency: Refer to: p54124
Description: Sets the signal source for the current setpoint for manual operation of the battery charging characteristic.
Manual operation:
Binector input p54201 = 1 signal
Dependency: Refer to: p54201
Description: Sets the signal source for switching over between manual and automatic operation for the battery charging
characteristic.
BI: p54201 = 1 signal:
Automatic operation.
BI: p54201 = 0 signal:
Manual operation.
Description: Sets the signal source for the voltage actual value of the battery charging characteristic.
p54142 CI: Voltage controller negative current limit signal source / U_ctr I_lim negS_s
DCP_CTRL Can be changed: T Access level: 2
Data type: Unsigned32 / FloatingPoint32 Func. diagram: 6818
Min Max Factory setting
- - 52004[0]
p54145 BI: Voltage controller enable signal source / U_ctrl enab s_src
DCP_CTRL Can be changed: T Access level: 2
Data type: Unsigned32 / Binary Func. diagram: 6818
Min Max Factory setting
- - 1
p54146 Voltage controller DC link buffering minimum time / U_ctrl Vdc t_min
DCP_CTRL Can be changed: U, T Access level: 2
Data type: FloatingPoint32 Func. diagram: 6818
Min Max Factory setting
0.00 [ms] 100000.00 [ms] 0.00 [ms]
p54200 CI: Battery charging char. manual current setpoint signal source / Batt man I_s s_src
DCP_CTRL Can be changed: T Access level: 2
Data type: Unsigned32 / FloatingPoint32 Func. diagram: 6720
Min Max Factory setting
- - 2050[1]
p54201 BI: Battery charging characteristic manual/auto signal source / Batt man/aut s_src
DCP_CTRL Can be changed: T Access level: 2
Data type: Unsigned32 / Binary Func. diagram: 6720
Min Max Factory setting
- - 1
p54203 CI: Battery charging char. voltage actual value signal source / Batt U_act s_src
DCP_CTRL Can be changed: T Access level: 2
Data type: Unsigned32 / FloatingPoint32 Func. diagram: 6720
Min Max Factory setting
- - 55506[0]