Siemens sinamics dcp - r4755[0...16383] Trace 1 trace buffer signal 5 floating point; Trace 1 tr sig 5; r4756[0...16383] Trace 1 trace buffer signal 6 floating point; Trace 1 tr sig 6; r4757[0...16383] Trace 1 trace buffer signal 7 floating point; Trace 1 tr sig 7; r4760[0...16383] Trace 0 trace buffer signal 0; Trace 0 tr sig 0

SINAMICS DCP
List Manual (LH21), 05/2016
169
2 Parameters
2.2 List of parameters
Description: Displays the trace buffer (record buffer) for trace 1 and signal 5.
Dependency: Refer to: r4740, p4795
Description: Displays the trace buffer (record buffer) for trace 1 and signal 6.
Dependency: Refer to: r4740, p4795
Description: Displays the trace buffer (record buffer) for trace 1 and signal 7.
Dependency: Refer to: r4740, p4795
Description: Displays the trace buffer (record buffer) for trace 0 and signal 0 as integer number.
Note: For signals, data type I32 or U32, the trace buffer is assigned as follows:
r4760[0] = value 0
r4760[1] = value 1
...
r4760[8191] = value 8191
For signals, data type I16 or U16, the trace buffer is assigned as follows:
r4760[0] = value 1 (bit 31 ... 16) and value 0 (bit 15 ... 0)
r4760[1] = value 3 (bit 31 ... 16) and value 2 (bit 15 ... 0)
...
r4760[8191] = value 16383 (bit 31 ... 16) and value 16382 (bit 15 ... 0)
For signals, data type I8 or U8, the trace buffer is assigned as follows:
r4760[0] = value 3 (bit 31 ... 24) value 2 (bit 23 ... 16) value 1 (bit 15 ... 8) value 0 (bit 7 ... 0)
r4760[1] = value 7 (bit 31 ... 24) value 6 (bit 23 ... 16) value 5 (bit 15 ... 8) value 4 (bit 7 ... 0)
...
r4760[8191] = value 32767 (bit 31 ... 24) value 32766 (bit 23 ... 16) value 32765 (bit 15 ... 8) value 32764 (bit 7 ... 0)
Description: Displays the trace buffer (record buffer) for trace 0 and signal 1.
r4755[0...16383] Trace 1 trace buffer signal 5 floating point / Trace 1 tr sig 5
CU_DCP Can be changed: - Access level: 3
Data type: FloatingPoint32 Func. diagram: -
Min Max Factory setting
- - -
r4756[0...16383] Trace 1 trace buffer signal 6 floating point / Trace 1 tr sig 6
CU_DCP Can be changed: - Access level: 3
Data type: FloatingPoint32 Func. diagram: -
Min Max Factory setting
- - -
r4757[0...16383] Trace 1 trace buffer signal 7 floating point / Trace 1 tr sig 7
CU_DCP Can be changed: - Access level: 3
Data type: FloatingPoint32 Func. diagram: -
Min Max Factory setting
- - -
r4760[0...16383] Trace 0 trace buffer signal 0 / Trace 0 tr sig 0
CU_DCP Can be changed: - Access level: 3
Data type: Unsigned32 Func. diagram: -
Min Max Factory setting
- - -
r4761[0...16383] Trace 0 trace buffer signal 1 / Trace 0 tr sig 1
CU_DCP Can be changed: - Access level: 3
Data type: Unsigned32 Func. diagram: -
Min Max Factory setting
- - -
Siemens Parts