Siemens sinamics dcp - r55521 CO: Actual value reactor current power unit 1 averaged; ActVal I_re PU1 avg; r55522 CO: Actual value reactor current power unit 2 averaged; ActVal I_re PU2 avg; r55523 CO: Actual value reactor current power unit 3 averaged; ActVal I_re PU3 avg; p55525 Actual value current offset adjustment; ActVal I offs adj

SINAMICS DCP
List Manual (LH21), 05/2016
303
2 Parameters
2.2 List of parameters
Description: Display and connector output for the averaged reactor current of power unit 1.
Dependency: Refer to: r55520
Description: Display and connector output for the averaged reactor current of power unit 2.
Dependency: Refer to: r55520
Description: Display and connector output for the averaged reactor current of power unit 3.
Dependency: Refer to: r55520
Description: Sets the offset for the "local" adjustment of the current actual value.
Description: Sets the gain for the "local" adjustment of the current actual value.
Description: Displays the sum of the averaged reactor currents.
The value is the sum of r55531, r55532 and r55533.
Dependency: Refer to: r55531, r55532
r55521 CO: Actual value reactor current power unit 1 averaged / ActVal I_re PU1avg
DCP_CTRL Can be changed: - Access level: 2
Data type: FloatingPoint32 Func. diagram: 6850
Min Max Factory setting
- [%] - [%] - [%]
r55522 CO: Actual value reactor current power unit 2 averaged / ActVal I_re PU2avg
DCP_CTRL Can be changed: - Access level: 2
Data type: FloatingPoint32 Func. diagram: 6850
Min Max Factory setting
- [%] - [%] - [%]
r55523 CO: Actual value reactor current power unit 3 averaged / ActVal I_re PU3avg
DCP_CTRL Can be changed: - Access level: 2
Data type: FloatingPoint32 Func. diagram: 6850
Min Max Factory setting
- [%] - [%] - [%]
p55525 Actual value current offset adjustment / ActVal I offs adj
DCP_CTRL Can be changed: U, T Access level: 3
Data type: FloatingPoint32 Func. diagram: 6850
Min Max Factory setting
-5.00 [%] 5.00 [%] 0.00 [%]
p55526 Actual value current gain adjustment / ActVal I gain adj
DCP_CTRL Can be changed: U, T Access level: 3
Data type: FloatingPoint32 Func. diagram: 6850
Min Max Factory setting
-5.00 [%] 5.00 [%] 0.00 [%]
r55530 Actual value reactor current sum averaged / ActVal I_re SumAvg
DCP_CTRL Can be changed: - Access level: 1
Data type: FloatingPoint32 Func. diagram: 6850
Min Max Factory setting
- [A] - [A] - [A]
Siemens Parts