2 Parameters
2.2 List of parameters
SINAMICS DCP
88 List Manual (LH21), 05/2016
Description: Selects bits to be sent to the PROFIdrive controller.
The individual bits are combined to form free status word 4.
Index: [0] = Bit 0
[1] = Bit 1
[2] = Bit 2
[3] = Bit 3
[4] = Bit 4
[5] = Bit 5
[6] = Bit 6
[7] = Bit 7
[8] = Bit 8
[9] = Bit 9
[10] = Bit 10
[11] = Bit 11
[12] = Bit 12
[13] = Bit 13
[14] = Bit 14
[15] = Bit 15
Dependency: Refer to: p2088, r2089
Description: Selects bits to be sent to the PROFIdrive controller.
The individual bits are combined to form free status word 5.
Index: [0] = Bit 0
[1] = Bit 1
[2] = Bit 2
[3] = Bit 3
[4] = Bit 4
[5] = Bit 5
[6] = Bit 6
[7] = Bit 7
[8] = Bit 8
[9] = Bit 9
[10] = Bit 10
[11] = Bit 11
[12] = Bit 12
[13] = Bit 13
[14] = Bit 14
[15] = Bit 15
Dependency: Refer to: p2088, r2089
Description: Setting to invert the individual binector inputs of the binector connector converter.
p2083[0...15] BI: Binector-connector converter status word 4 / Bin/con ZSW4
All objects Can be changed: U, T Access level: 3
Data type: Unsigned32 / Binary Func. diagram: 2472
Min Max Factory setting
- - 0
p2084[0...15] BI: Binector-connector converter status word 5 / Bin/con ZSW5
All objects Can be changed: U, T Access level: 3
Data type: Unsigned32 / Binary Func. diagram: 2472
Min Max Factory setting
- - 0
p2088[0...4] Invert binector-connector converter status word / Bin/con ZSW inv
All objects Can be changed: U, T Access level: 3
Data type: Unsigned16 Func. diagram: 2472
Min Max Factory setting
- - 0000 0000 0000 0000 bin
To Next Page
Loading...
