Siemens sinamics dcp - p50790 CUD digital input;output 4 input delay time; DI;DO 4 t_del_inp; p50791 CUD digital input;output 5 input delay time; DI;DO 5 t_del_inp; p50792 CUD digital input;output 6 input delay time; DI;DO 6 t_del_inp; p50793 CUD digital input;output 7 input delay time; DI;DO 7 t_del_inp

SINAMICS DCP
List Manual (LH21), 05/2016
257
2 Parameters
2.2 List of parameters
Index: [0] = DI/DO 4 (X177.15)
[1] = DI/DO 5 (X177.16)
[2] = DI/DO 6 (X177.17)
[3] = DI/DO 7 (X177.18)
Note: DI/DO: bidirectional digital input/digital output
Description: Sets the input delay time for digital input/output 4 (DI/DO 4, X177.15) on the CUD.
Dependency: Refer to: r53010
Note: DI/DO: bidirectional digital input/digital output
Description: Sets the input delay time for digital input/output 5 (DI/DO 5, X177.16) on the CUD.
Dependency: Refer to: r53010
Note: DI/DO: bidirectional digital input/digital output
Description: Sets the input delay time for digital input/output 6 (DI/DO 6, X177.17) on the CUD.
Dependency: Refer to: r53010
Note: DI/DO: bidirectional digital input/digital output
Description: Sets the input delay time for digital input/output 7 (DI/DO 7, X177.18) on the CUD.
Dependency: Refer to: r53010
Note: DI/DO: bidirectional digital input/digital output
Description: Displays the mainboard serial number.
Index 0: serial number character 1
...
Index 31: serial number character 32
Note: An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.
p50790 CUD digital input/output 4 input delay time / DI/DO 4 t_del_inp
DCP_CTRL Can be changed: U, T Access level: 3
Data type: FloatingPoint32 Func. diagram: 2060
Min Max Factory setting
0 [ms] 10000 [ms] 0 [ms]
p50791 CUD digital input/output 5 input delay time / DI/DO 5 t_del_inp
DCP_CTRL Can be changed: U, T Access level: 3
Data type: FloatingPoint32 Func. diagram: 2060
Min Max Factory setting
0 [ms] 10000 [ms] 0 [ms]
p50792 CUD digital input/output 6 input delay time / DI/DO 6 t_del_inp
DCP_CTRL Can be changed: U, T Access level: 3
Data type: FloatingPoint32 Func. diagram: 2065
Min Max Factory setting
0 [ms] 10000 [ms] 0 [ms]
p50793 CUD digital input/output 7 input delay time / DI/DO 7 t_del_inp
DCP_CTRL Can be changed: U, T Access level: 3
Data type: FloatingPoint32 Func. diagram: 2065
Min Max Factory setting
0 [ms] 10000 [ms] 0 [ms]
r50810[0...31] Mainboard serial number / Mainb serial no.
DCP_CTRL Can be changed: - Access level: 3
Data type: Unsigned8 Func. diagram: 8054
Min Max Factory setting
- - -
Siemens Parts