2 Parameters
2.2 List of parameters
SINAMICS DCP
172 List Manual (LH21), 05/2016
Description: Displays the trace buffer (record buffer) for trace 1 and signal 6.
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 1 and signal 7.
Dependency: Refer to: r4760
Description: Sets the physical address for the first signal to be traced.
The data type is defined using p4730.
Index: [0] = Trace 0
[1] = Trace 1
Description: Sets the physical address for the second signal to be traced.
The data type is defined using p4731.
Index: [0] = Trace 0
[1] = Trace 1
Description: Sets the physical address for the third signal to be traced.
The data type is defined using p4732.
Index: [0] = Trace 0
[1] = Trace 1
r4776[0...16383] Trace 1 trace buffer signal 6 / Trace 1 tr sig 6
CU_DCP Can be changed: - Access level: 3
Data type: Unsigned32 Func. diagram: -
Min Max Factory setting
- - -
r4777[0...16383] Trace 1 trace buffer signal 7 / Trace 1 tr sig 7
CU_DCP Can be changed: - Access level: 3
Data type: Unsigned32 Func. diagram: -
Min Max Factory setting
- - -
p4780[0...1] Trace physical address signal 0 / Trace PhyAddr Sig0
CU_DCP Can be changed: U, T Access level: 3
Data type: Unsigned32 Func. diagram: -
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin
p4781[0...1] Trace physical address signal 1 / Trace PhyAddr Sig1
CU_DCP Can be changed: U, T Access level: 3
Data type: Unsigned32 Func. diagram: -
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin
p4782[0...1] Trace physical address signal 2 / Trace PhyAddr Sig2
CU_DCP Can be changed: U, T Access level: 3
Data type: Unsigned32 Func. diagram: -
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin
To Next Page
Loading...
