Boeing 707 - Page 193

PARAGRAPH PAGE
8. SEALED SPLICE CONFIGURATIONS FOR UNSHIELDED WIRES AND UNSHIELDED CABLES
FOR HIGH TEMPERATURE (continued) 119
F. Sealed Splice Configurations for Unshielded Wires and Cables for High Temperature -
Two Wires to Two Wires - Tape, Ties 138
G. Sealed Splice Configurations for Unshielded Wires and Cables for High Temperature -
Two Wires to Two Wires - Tape, Sleeve 141
H. Sealed Splice Configurations for Unshielded Wires and Cables for High Temperature -
One Cable to One Cable - Tape, Ties 144
I. Sealed Splice Configurations for Unshielded Wires and Cables for High Temperature -
One Cable to One Cable - Tape, Sleeve 146
9. CONDUCTOR SPLICE CONFIGURATIONS FOR SHIELDED WIRES AND SHIELDED CABLES
148
A. Splice Assembly Configurations 148
B. Internal Conductor Splice for a Shielded Wire or Cable - One Wire to One Wire - Tape 149
C. Internal Conductor Splice for a Shielded Wire or Cable - One Wire to Two Wires - Tape 152
D. Internal Conductor Splice for a Shielded Wire or Cable - Two Wires to Two Wires - Tape 156
E. Internal Conductor Splice for a Shielded Wire or Cable - One Wire to One Wire for High
Temperature - Tape 159
F. Internal Conductor Splice for a Shielded Wire or Cable - One Wire to Two Wires for High
Temperature - Tape 162
G. Internal Conductor Splice for a Shielded Wire or Cable - Two Wires to Two Wires for
High Temperature - Tape 167
10. SEALED SPLICE CONFIGURATIONS WITH MECHANICAL FERRULES FOR SHIELDED WIRE
AND SHIELDED CABLE 169
A. Splice Assembly Configurations 169
B. Sealed Splice Configurations for Shielded Wire and Cable - One Shielded Wire to One
Shielded Wire - Mechanical Ferrules, Tape, Ties 171
C. Sealed Splice Configurations for Shielded Wire and Cable - One Shielded Wire to One
Shielded Wire - Mechanical Ferrules, Tape, Sleeve 174
D. Sealed Splice Configurations for Shielded Wire and Cable - One Shielded Wire to Two
Shielded Wires - Mechanical Ferrules, Tape, Ties 177
E. Sealed Splice Configurations for Shielded Wire and Cable - One Shielded Wire to Two
Shielded Wires - Mechanical Ferrules, Tape, Sleeve 182
F. Sealed Splice Configurations for Shielded Wire and Cable - Two Shielded Wires to Two
Shielded Wires - Mechanical Ferrules, Tape, Ties 187
G. Sealed Splice Configurations for Shielded Wire and Cable - Two Shielded Wires to Two
Shielded Wires - Mechanical Ferrules, Tape, Sleeve 191
H. Sealed Splice Configurations for Shielded Wire and Cable - One Shielded Cable to One
Shielded Cable - Mechanical Ferrules, Tape, Ties 195
I. Sealed Splice Configurations for Shielded Wire and Cable - One Shielded Cable to One
Shielded Cable - Mechanical Ferrules, Tape, Sleeve 198
ASSEMBLY OF SPLICES
707, 727-787
STANDARD WIRING PRACTICES MANUAL
20-30-12
Page 3
Jun 15/2021D6-54446
ECCN 9E991 BOEING PROPRIETARY - See title page for details