(6) Continue to wind the length of the tape tightly around the forward end of the insulation sleeve of
the second terminal lug. Refer to Figure 29.
INITIAL POSITION OF THE TAPE ON THE SECOND TERMINAL LUG
Figure 28
POSITION OF THE SECOND LAYER OF TAPE ON THE SECOND TERMINAL LUG
Figure 29
ELECTRICAL CONNECTION OF EQUIPMENT AND INSTALLATION OF TERMINAL LUGS
707, 727-787
STANDARD WIRING PRACTICES MANUAL
20-30-00
Page 35
Jun 15/2018D6-54446
ECCN 9E991 BOEING PROPRIETARY - See title page for details
To Next Page
Loading...
