Send document comments to nexus7k-feedback-doc@cisco.com
2-140
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
EIGRP Messages
Error Message EIGRP-2-NO_MEMORY Format: Can't allocate memory in function %s
Explanation Cannot allocate memory in specified function.
Parameters: Function ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message EIGRP-2-NO_SET_PRIORITY Format: Failed to set policy or priority
Explanation EIGRP process could not set itself process priority, exiting.
Recommended Action Restart the component when the system is working.
Error Message EIGRP-2-PROCINFO_CREATE_FAIL Format: eigrp_procinfo creation failed
Explanation Failed to create procinfo.
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message EIGRP-2-PTHREAD_FAILED Format: %s failed in %s for thread %s
Explanation EIGRP process failed to create a task thread.
Parameters: Pthread operation, Function, Thread name ...
Recommended Action Restart the component when the system is working.
Error Message EIGRP-2-REG_L3VM Format: Failed to register with l3vm
Explanation Failed to register with the l3vm process.
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message EIGRP-2-REG_OPCODE Format: Could not register opcode 0x%x, reason %s
Explanation Could not register mts opcode with the reason.
Parameters: Opcode, Reason ...
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.