Send document comments to nexus7k-feedback-doc@cisco.com
2-141
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
EIGRP Messages
Error Message EIGRP-2-RLIMIT_FAILED Format: Couldn't set data segment size to %lu
Explanation EIGRP process could not set its memory resource limit, exiting.
Parameters: Data segment size ...
Recommended Action Restart the component when the system is working.
Error Message EIGRP-2-SBCR_INIT Format: Could not initialize shared database
client, rc=0x%x [%s]
Explanation Failed to initialize shared database client with return error code.
Parameters: Error code, Error string ...
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message EIGRP-2-TIMER_CREATE_FAIL Format: Failed to create %s active timer
Explanation Failed to create specified active timer.
Parameters: Active timer name ...
Recommended Action Restart the component when the system is working.
Error Message EIGRP-2-TIMER_SET_INIT Format: Couldn't init %s active timer set
Explanation EIGRP failed to initialize timer resource.
Parameters: Timer set name ...
Recommended Action Restart the component when the system is working.
Error Message EIGRP-2-URIB_ADD_ROUTE Format: urib_add_route() failed
Explanation Failed to add routes to URIB.
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message EIGRP-2-URIB_DEL_ROUTE Format: urib_delete_route() failed
Explanation Failed to delete routes from URIB.
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.