Send document comments to nexus7k-feedback-doc@cisco.com
2-146
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
EIGRP Messages
Error Message EIGRP-3-SIA_DUAL Format: Route %s stuck-in-active state in %s %d.
Cleaning up
Explanation EIGRP route stuck-in-active, cleanup happened.
Parameters: Route, DUAL descriptor block name, Autonomous system number ...
Recommended Action No action is required.
Error Message EIGRP-3-SYSMGR_DISPATCH Format: Error returned from
sysmgr_dispatch(), errno: %s
Explanation EIGRP called the system manager API which returned an error.
Parameters: Error string ...
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message EIGRP-3-SYSMGR_QUERY Format: Sysmgr state query failed for uuid %d,
tag %s
Explanation A software or hardware error occurred.
Parameters: Service UUID, Process Tag ...
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message EIGRP-3-UNKNOWN_MTYPE Format: Unknown mtype: %d/%d in %s
Explanation EIGRP process received unknown Interprocess message, dropped.
Parameters: Message major type, Message mior type, Function ...
Recommended Action No action is required.
Error Message EIGRP-3-UNKTIMER_DUAL Format: Unknown timer type %d expiration
Parameters: Managed timer id ...
Explanation A software or hardware error occurred.
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
To Next Page
Loading...
Need help?
General
