Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-145
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
EIGRP Messages
Error Message EIGRP-3-PFXLIMITTHR_DUAL Format: %s %d %s reached prefix limit
threshold
Explanation Prefix limit threshold reached.
Parameters: DUAL descriptor block name, Autonomous system number, Prefix type ...
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message EIGRP-3-PROBESEQ_DUAL Format: Bad probe sequence %d from %s, expecting
%d Parameters: Probe seq no received, Peer, Expected seq no ...
Explanation A software or hardware error occurred.
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message EIGRP-3-RDBLEFT_DUAL Format: dest %s, nexthop %s (%s), origin %s
Explanation A software or hardware error occurred.
Parameters: Route, Next hop, Inteface Origin ...
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message EIGRP-3-REFCOUNT_DUAL Format: Negative refcount in pakdesc %x
Explanation A software or hardware error occurred.
Parameters: Packet descriptor ...
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message EIGRP-3-RPM_REDIST_INIT Format: Couldn't initialize redistribution
API for %s
Explanation EIGRP failed to open API to interact with the component.
Parameters: RedistRIButed client ...
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English