Cisco AP775A - Nexus Converged Network Switch 5010

Send document comments to nexus7k-feedback-doc@cisco.com
2-286
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
IPS Messages
Error Message IPS-3-ISLB_CFS_PWWN_RESV_CLAIM_FAILED: [chars]
Explanation PWWN reservation claim failed. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_CFS_PWWN_RESV_RELEASE_FAILED: [chars]
Explanation PWWN reservation release failed. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_CFS_UNLOCK_FAILED: [chars]
Explanation An error has occurred while releasing the CFS lock. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_CFS_VRRP_DIST_FAILED: [chars]
Explanation An error has occurred while distRIButing the VRRP CFS runtime data. The reason for
the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_ZONE_ACTIVATION_FAILED: iSLB zoneset activation returned
[hex] for VSAN [dec]
Explanation ISLB zone set activation failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_ZONE_ACTIVATION_RETRY: iSLB zoneset activation returned
[hex] for VSAN [dec]
Explanation ISLB zone set activation failed. Zone server busy.
Recommended Action Retry the iSLB zonest activation.
Error Message IPS-3-ISLB_ZONE_NO_ACTIVE_ZONESET: iSLB zoneset activation returned
[hex] for VSAN [dec]
Explanation ISLB zone set activation failed. No active zone set.
Recommended Action Activate a zone set in the specified VSAN and retry.