Send document comments to nexus7k-feedback-doc@cisco.com
2-317
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ISIS Messages
Error Message ISIS-2-REDIST_PIB_SHM Format: Failed to attach to redistributing
PIB's SHM %s
Explanation An unexpected but recoverable event has occurred.
Parameters: PIB Name ...
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message ISIS-2-ROUTE_BUF_OVERFLOW Format: %s route buffer overflow at entry
%lu\n
Explanation An unexpected but recoverable event has occurred.
Parameters: Address Family, Counter Location ...
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message ISIS-2-ROUTE_NOTIFY Format: Route notifications to the RIB are not
possible. This will result in stale state in the FIB.
Explanation An unexpected but recoverable event has occurred.
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message ISIS-2-RUNTIME_CLEANUP_FAILURE Format: Unexpected runtime cleanup
failure. Failed to %s
Explanation An unexpected software error has occurred while cleaning up a sub-component.
Parameters: Reason ...
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message ISIS-2-RUNTIME_INIT_FAILURE Format: Unexpected runtime initialization
failure. Failed to %s
Explanation An unexpected software error has occurred while initializing a sub-component.
Parameters: Reason ...
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message ISIS-2-STARTUP_FAILURE Format: Startup failure. Failed to %s
Explanation An unrecoverable software error has occurred during startup.
Parameters: Reason ...
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
To Next Page
Loading...
Need help?
General
