Send document comments to nexus7k-feedback-doc@cisco.com
2-318
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ISIS Messages
Error Message ISIS-2-SUM_DIST Format: sum-addr %s/%d has zero route-dist candidate
count
Explanation An unexpected but recoverable event has occurred.
Parameters: Summary Address Prefix, Summary Address Mask ...
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message ISIS-2-TLV_MIGRATE Format: L%d %s still has TLV during migration
Explanation An unexpected but recoverable event has occurred.
Parameters: Level, LSP-ID ...
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message ISIS-2-URIB_ADD_RNH_FAILURE Format: Cannot add RNH to %s
Explanation An unexpected but recoverable event has occurred.
Parameters: RIB Address Family ...
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message ISIS-2-URIB_UPDATE Format: Failed to notify SPF thread about route
update buffer availability
Explanation An unexpected but recoverable event has occurred.
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
ISIS-3
Error Message ISIS-3-AVL_LOOKUP Format: Can't locate CSNP fragment for %s
Explanation SNP cache may get cleaned up during normal operation
Parameters: LSP-ID ...
Recommended Action No action is required.
Error Message ISIS-3-LSP_REFRESH Format: Refresh non-self-originated level-%d LSP
%s
Explanation An unexpected but recoverable event has occurred.
Parameters: Level, LSP-ID ...
Recommended Action No action is required.