Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-398
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
MRIB Messages
Error Message MRIB-3-MTS_SHORT_MSG_ERROR Format: Received short (%d < %d) MTS
message on %s queue with opcode %d, dropping it
Explanation MRIB received an unknown message. The message is dropped.
Recommended Action No action is required.
Error Message MRIB-3-MUTEX_INIT Format: Couldn't init mutex %s
Explanation The MRIB process has failed to initialize the mutex system resource.
Parameters: Thread Name ...
Recommended Action Dump core, and then restart component.
Error Message MRIB-3-NO_FREE_GROUP Format: Unable to free group entry for %s in
mrib_delete_route_internal()
Explanation MRIB process unable to delete a route-table entry.
Parameters: Group ...
Recommended Action No action is required.
Error Message MRIB-3-NO_FREE_SOURCE Format: Unable to free source entry for %s in
mrib_delete_route_internal()
Explanation MRIB process unable to delete a route-table entry.
Parameters: Source ...
Recommended Action No action is required.
Error Message MRIB-3-NO_GROUP Format: Unable to create group entry for %s
Explanation MRIB process unable to create the route entry in its route-table.
Parameters: Group ...
Recommended Action No action is required.
Error Message MRIB-3-NO_MPIB Format: Unable to get mpib index in
mrib_register_internal()
Explanation MRIB process cannot register the protocol as it has run out of PIB indices.
Recommended Action Dump core, then reload the stack.
Error Message MRIB-3-NO_SET_PRIORITY Format: Failed to set policy or priority
Explanation MRIB process could not set itself process priority, exiting.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English