Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-399
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
MRIB Messages
Error Message MRIB-3-NO_SOURCE Format: Unable to create source entry for %s
Explanation MRIB process unable to create the route entry in its route-table.
Parameters: Source ...
Recommended Action No action is required.
Error Message MRIB-3-NO_TIMER Format: Could not create stale timer for \%s\
Explanation MRIB process cannot stale the routes for this procotol.
Parameters: PIB Name ...
Recommended Action Dump core, then reload the stack.
Error Message MRIB-3-OPCODE_REGISTER Format: %s opcode: 0x%x ErrorString: %s
Explanation Opcdoe registration failed
Parameters: Message Return Code Error String ...
Recommended Action No action is required.
Error Message MRIB-3-PSS Format: Error returned from %s, errno: 0x%08x (%s) in %s()
Explanation MRIB called a PSS API which returned an error. The error reported should be examined
for the cause.
Parameters: Failed API, Error Code, Error Description, MRIB Function ...
Recommended Action ERRMSG.
Error Message MRIB-3-PT_FAILED Format: %s failed in %s
Explanation The MRIB process has failed to update route-table for this event.
Parameters: PT Operation, Function Name ...
Recommended Action Dump core, then reload the stack.
Error Message MRIB-3-PTHREAD_FAILED Format: pthread_create() failed for mrib_main()
Explanation The MRIB process has failed to create a task thread.
Recommended Action Dump core, then reload the stack.
Error Message MRIB-3-RDLOCK_ASSERT Format: %s:%d: Assert, read-lock not acquired
Explanation Caller Failed to get MRIB Shared Memory read lock
Parameters: Function Name, Line ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English