Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-435
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
OSPF Messages
Error Message OSPF-3-PSS_SR Format: PSS %s for sr %ld failed
Explanation OSPF called a PSS API which returned an error.
Parameters: Action, Subrouter Id ...
Recommended Action No action is required.
Error Message OSPF-3-ROUTEDEL Format: Route deletion %s/%d failed
Explanation Internal Error.
Parameters: Prefix, Length ...
Recommended Action No action is required.
Error Message OSPF-3-SMALLBUF Format: %s packet doesn't fit in buffer (packet %d/
buffer %d)
Explanation The router has allocated a packet buffer that was too small.
Parameters: Packet Type, Packet Size, Buffer Size ...
Recommended Action No action is required.
Error Message OSPF-3-TLV_INTF Format: Failed to convert to %s for %s
Explanation OSPF called an TLV intf which returned an error.
Parameters: Action, Data ...
Recommended Action No action is required.
Error Message OSPF-3-UNAWAKABLE Format: Trying to awake unawakable thread %s
Explanation Thread cannot be wokenup at this time
Parameters: Thread Name ...
Recommended Action No action is required.
Error Message OSPF-3-UNKNOWNSIG Format: Received unknown signal: %d
Explanation An unexpected software interroruption was received.
Parameters: Signal ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English