Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-436
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
OSPF Messages
OSPF-4
Error Message OSPF-4-AF_NO_FUNC Format: Function %s not supported by OSPF version %s
Explanation Function is not specified for the current address family
Parameters: Function Name, OSPF Version ...
Recommended Action No action is required.
Error Message OSPF-4-AREA_ERR Format: Packet from %s on %s received for wrong area
%s
Explanation A OSPF packet not belonging to this area was received
Parameters: Source IP address, Interface name, Area ID ...
Recommended Action No action is required.
Error Message OSPF-4-AUTH_ERR Format: Received packet from %s on %s with bad
authentication %hx
Explanation A OSPF packet with mismatched authentication type was received
Parameters: Source IP address, Interface name, Type ...
Recommended Action No action is required.
Error Message OSPF-4-CKSM_ERR Format: Bad OSPF checksum in packet %hx computed %hx
from %s on %s
Explanation A OSPF packet with invalid checksum was received
Parameters: Checksum value, Checksum value, Source IP address, Interface name ...
Recommended Action No action is required.
Error Message OSPF-4-CLEANUP Format: OSPF is exiting, reason 0x%x ; Parameters:
Reason ...
Explanation OSPF has been deconfigured or restarted.
Recommended Action No action is required.
Error Message OSPF-4-DEST_INVALID Format: Bad destination address %s
Explanation A OSPFv3 packet with muticast source address was received
Parameters: Source IP address ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English