Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-447
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PIM Messages
Error Message PIM-3-MCEC_MSG Format: %s
Explanation PIM VPC related messages
Parameters: String ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM-3-MQCLOSE Format: Couldn't close %s mq: %s
Explanation PIM failed to close the message-queue resource.
Recommended Action No action is required.
Error Message PIM-3-MQFLUSH Format: Couldn't flush %s mq: %s
Explanation PIM failed to remove stale messages from the message-queue.
Recommended Action No action is required.
Error Message PIM-3-MQLOOP_CREATE Format: Couldn't create %s mqloop: %s
Explanation PIM failed to create the mqloop resource.
Parameters: MSG Queue Name, Error String ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM-3-MQLOOP_REGHAND Format: Couldn't register all handlers for %s
mqloop
Explanation PIM failed to initialize handlers the mqloop resource.
Parameters: MSG Queue Name ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM-3-MQLOOP_SHUTDOWN Format: Couldn't shutdown %s mqloop
Explanation PIM failed to shutdown the mqloop resource.
Parameters: MSG Queue Name ...
Recommended Action No action is required.
Error Message PIM-3-MQLOOP_START Format: Couldn't start %s mqloop
Explanation PIM failed to initialize the mqloop resource.
Parameters: MSG Queue Name, Error String ...
Recommended Action Dump core, and and and then restart component.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English