Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-448
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PIM Messages
Error Message PIM-3-MQOPEN Format: Couldn't open %s mq: %s
Explanation PIM failed to open the message-queue resource.
Parameters: Component, Function Name ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM-3-MQSEND Format: mq_send() error on %s queue in %s
Explanation PIM failed to send an IPC message on the message-queue.
Parameters: Component, Function Name ...
Recommended Action No action is required.
Error Message PIM-3-MRIB_ADD_ROUTE Format: MRIB add route failed in %s
Explanation PIM failed to add route in MRIB.
Parameters: Function Name ...
Recommended Action No action is required.
Error Message PIM-3-MRIB_DEL_ROUTE Format: MRIB delete route failed in %s
Explanation PIM failed to delete route in MRIB.
Parameters: Function Name ...
Recommended Action No action is required.
Error Message PIM-3-MRIB_NO_SHARED_TREE Format: MRIB shared tree entry absent for
group %s/%d
Explanation The MRIB route is unexpectedly absent for a group entry.
Parameters: Group address Group mask length ...
Recommended Action No action is required.
Error Message PIM-3-MSDP_ORIG_DATASA Format: Couldn't originate MSDP data SA in %s
Explanation PIM failed to notify MSDP to originate data SA message.
Parameters: Function Name ...
Recommended Action No action is required.
Error Message PIM-3-MTS_DROP Format: Error returned from mts_drop(), errno: %s
Explanation PIM called an MTS API which returned an error.
Parameters: Error String ...
Recommended Action Dump core, and and and then restart component.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English