Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-449
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PIM Messages
Error Message PIM-3-MTS_INIT Format: Could not initialize MTS for %s
Explanation The system is unable to register opcodes
Parameters: Service / Queue description ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM-3-MTS_RECV Format: Error returned from mts_recv(), errno: %s
Explanation PIM called an MTS API which returned an error.
Parameters: Error String ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM-3-MTSOPEN Format: Couldn't bind %s mts-q: %s
Explanation PIM failed to open the MTS-queue resource.
Parameters: MSG Queue Name, Error String ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM-3-MUTEX_INIT Format: Couldn't init mutex %s
Explanation PIM process failed to initialize the mutex system resource.
Parameters: Thread Name ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM-3-NO_SET_PRIORITY Format: Failed to set policy or priority
Explanation PIM process could not set itself process priority, exiting.
Recommended Action No action is required.
Error Message PIM-3-OPCODE_REG Format: Could not register opcode 0x%x, reason %s
Explanation The system is unable to register opcodes
Parameters: MTS Opcode, Error string ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM-3-PIM_API_NOT_INIT Format: PIM API not initialized
Explanation PIM API is not initialized.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English