Send document comments to nexus7k-feedback-doc@cisco.com
2-459
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PIM6 Messages
Error Message PIM6-3-CREATE_ROUTE Format: Couldn't create PIM6 route for %s in %s
Explanation PIM6 failed to update the local route-table entry.
Parameters: Addresses, Function Name ...
Recommended Action No action is required.
Error Message PIM6-3-CV_INIT Format: Couldn't init cond var %s
Explanation PIM6 process failed to initialize a conditional-variable resource.
Parameters: Thread Name ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM6-3-DEL_IF Format: Couldn't delete interface %s from PIM6 route %s
in %s
Explanation PIM6 failed to delete the outgoing interface from route-table entry.
Parameters: Interface, Addresses, Function Name ...
Recommended Action No action is required.
Error Message PIM6-3-DEL_ROUTE Format: Couldn't delete PIM6 route %s in %s
Explanation PIM6 failed to delete the local route-table entry.
Parameters: Addresses, Function Name ...
Recommended Action No action is required.
Error Message PIM6-3-FREE_ROUTE Format: Couldn't free PIM6 route %s in %s
Explanation PIM6 failed to delete the route-table entry.
Parameters: Addresses, Function Name ...
Recommended Action No action is required.
Error Message PIM6-3-HEARTBEAT_TIMER Format: Unable to create heartbeat timer in %s
Explanation The system is unable to create heartbeat timer
Parameters: Function Name ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM6-3-INIT_MTS_SAP Format: mts_bind() failed in pim_init_mts(),
errno: %s
Explanation The system is unable to open MTS SAP
Parameters: Error String ...
Recommended Action Dump core, and and and then restart component.
To Next Page
Loading...
Need help?
General
