Send document comments to nexus7k-feedback-doc@cisco.com
2-460
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PIM6 Messages
Error Message PIM6-3-INVALID_MBUF Format: Received invalid mbuf pointer in %s
Explanation PIM6 received invalid data buffer, discarded.
Recommended Action No action is required.
Error Message PIM6-3-LIB_API_FAILED Format: %s API failed in %s
Explanation API call has failed in PIM6 library.
Recommended Action No action is required.
Error Message PIM6-3-LIB_API_INIT Format: Couldn't initialize %s API
Explanation PIM6 failed to open API to interact with the component.
Parameters: Component Name ...
Recommended Action No action is required.
Error Message PIM6-3-LIB_MALLOC Format: Private mem malloc (%lu) failed in %s
Explanation Process is out of free private memory.
Parameters: Type of malloc(size), Function Name ...
Recommended Action Configure the network or router to decrease the number of routes.
Error Message PIM6-3-LIB_SM_CLOSE Format: Couldn't close shm segment %s
Explanation PIM6 process failed to remove shared memory resource.
Parameters: Shared Memory Segment Name ...
Recommended Action No action is required.
Error Message PIM6-3-LIB_SM_OPEN Format: Couldn't open shm segment %s
Explanation PIM6 process failed to initialize shared memory resource.
Parameters: Shared Memory Segment Name ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM6-3-M6RIB_ADD_ROUTE Format: M6RIB add route failed in %s
Explanation PIM6 failed to add route in MRIB.
Parameters: Function Name ...
Recommended Action No action is required.
To Next Page
Loading...
Need help?
General
