Send document comments to nexus7k-feedback-doc@cisco.com
2-483
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PLATFORM Messages
Error Message PLATFORM-2-PFM_LC_STATUS: Module [dec] powered up with [dec] status
Explanation Status for the module that failed registration.
Recommended Action Try to replace the module.
Error Message PLATFORM-2-PFM_LIC_WARN_EXP: WARNING License for VEMs is about to
expire in [dec] days! The VEMs' VNICS will be brought down if license is allowed
to expire. Please contact your Cisco account team or partner to purchase Licenses.
To activate your purchased licenses, click on www.cisco.com/go/license.
Explanation The VEM license is about to expire.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac to obtain a license.
Error Message PLATFORM-2-PFM_LOW_MEMORY_CONDITION: Module [dec] is running low on
memory. %ld percent used
Explanation Supervisor is running low on memory.
Recommended Action Switchover.
Error Message PLATFORM-2-PFM_MODULE_POWER_OFF: Manual power-off of [chars] from
Command Line Interface
Explanation User initiated a module power-off from the CLI.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PLATFORM-2-PFM_MODULE_POWER_OFF: Manual power-off of Module [dec]
from Command Line Interface
Explanation User initiated a module power-off from the CLI.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PLATFORM-2-PFM_MODULE_POWER_OFF_TRIGGER: Power-off [chars] due to
[chars] policy trigger
Explanation Policy trigger initiated a module poweroff.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
To Next Page
Loading...
Need help?
General
