Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-485
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PLATFORM Messages
Error Message PLATFORM-2-PFM_SYSTEM_RESET: Manual system restart from Command Line
Interface
Explanation User initiated a system reload from the CLI.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PLATFORM-2-PFM_SYSTEM_RESET_TRIGGER: System restart due to [chars]
policy trigger
Explanation Policy/trigger initiated a system reload.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PLATFORM-2-PFM_SYSTEM_SHUTDOWN_TRIGGER: System shutdown due to
[chars] policy trigger
Explanation Policy/trigger initiated a system shutdown.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PLATFORM-2-PFM_VEM_DEFAULT_LICENSES_DEPLETED: License for VEM [dec]
could not be obtained. Please visit
http://wwwin-tools-stage.cisco.com/SWIFT/SLT/viewSltHome.do to purchase licenses
Explanation Only 4 VEMs can be licensed for a period of 90 days with default licenses.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac to obtain a license.
Error Message PLATFORM-2-PFM_VEM_DENY: Host [chars] cannot be inserted because all
vem slots are in use
Explanation All VEM slots have been allocated to hosts and a new host has been added to the DVS.
Recommended Action You can see the host/module mappings using the 'show module vem mapping'
command. In the configuration mode, remove any unused hosts using the 'no vem <module>'
command to free up VEM slots.
Error Message PLATFORM-2-PFM_VEM_REMOVE_MOD_FAIL: Removing VEM [dec] (failed
module)
Explanation The system has detected that a VEM has been removed because the module failed.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English