Send document comments to nexus7k-feedback-doc@cisco.com
2-499
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PM Messages
Error Message PM-3-PSS_API_INIT Format: Ksink pss API init failed (%d)
Explanation Ksink pss API init failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PM-3-PSS_REGISTER Format: PSS register failed (%d)
Explanation PSS register has failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PM-3-RP2RP_ERR Format: %s
Explanation A failure occurred in the communication with the other RP.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PM-3-THR_CREATE Format: Failed to create %s thread. error %d
Explanation A failure occurred while creating a thread.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PM-3-TLV_TO_STRUCT Format: TLV to Struct Conversion failed (%d)
Explanation TLV to Struct conversion failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PM-3-UNK_MSG Format: Unrecognized message in %s thread. major type
%d, minor type %d
Explanation An unknown message was received from another process.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PM-3-UNK_MSG_MAJOR Format: Unrecognized message from %s. Major type %d
Explanation An unknown message (major) was received from another process.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
To Next Page
Loading...
