EasyManuals Logo

Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Cisco AP775A - Nexus Converged Network Switch 5010
886 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #547 background imageLoading...
Page #547 background image
Send document comments to nexus7k-feedback-doc@cisco.com
2-509
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PORT Messages
Error Message PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_INVALID_TX_BBCREDIT: Interface
[chars] is down (Isolation due to ELP failure: loopback detected)
Explanation ELP failed on the interface due to loopback connection detected.
Recommended Action Connect to a port on another switch and try again.
Error Message PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_LOOPBACK_DETECTED: Interface
[chars] is down (Isolation due to ELP failure: invalid transmit B2B credit)
Explanation ELP failed on the interface due to invalid transmit B2B credit.
Recommended Action Configure the attached switchport correctly and try again.
Error Message PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_RATOV_EDTOV_MISMATCH: Interface
[chars] is down (Isolation due to ELP failure: R_A_TOV or E_D_TOV mismatch)
Explanation ELP failed on the interface due to R_A_TOV or E_D_TOV mismatch.
Recommended Action Configure R_A_TOV and E_D_TOV values correctly and try again.
Error Message PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_REVISION_MISMATCH: Interface
[chars] is down (Isolation due to ELP failure: revision mismatch)
Explanation ELP failed on the interface due to revision mismatch.
Recommended Action Configure the attached switchport correctly and try again.
Error Message PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_UNKNOWN_FLOW_CTL_CODE:
Interface [chars] is down (Isolation due to ELP failure: invalid flow control code)
Explanation ELP failed on the interface due to invalid flow control code.
Recommended Action Configure the attached switchport correctly and try again.
Error Message PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_UNKNOWN_FLOW_CTL_PARAM:
Interface [chars] is down (Isolation due to ELP failure: invalid flow control
param)
Explanation ELP failed on the interface due to invalid flow control param.
Recommended Action Configure the attached switchport correctly and try again.
Error Message PORT-5-IF_DOWN_EPP_FAILURE: Interface [chars] is down (Error Disabled
- EPP Failure)
Explanation Trunk protocol failed.
Recommended Action 'show port internal event-history msgs' will indicate the trunk protocol
exchanges to determine why it failed.

Table of Contents

Other manuals for Cisco AP775A - Nexus Converged Network Switch 5010

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco AP775A - Nexus Converged Network Switch 5010 and is the answer not in the manual?

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General IconGeneral
BrandCisco
ModelAP775A - Nexus Converged Network Switch 5010
CategorySwitch
LanguageEnglish

Related product manuals