Send document comments to nexus7k-feedback-doc@cisco.com
2-580
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
RPM Messages
Error Message RPM-3-LIB_KEYCHAIN Format: Unexpected keychain result :%s
Explanation Unexpected result during RPM keychain API processing
Parameters: Keychain Result ...
Recommended Action No action is required.
Error Message RPM-3-LIB_MTS_SEND Format: Error returned from mts_send(), errno: %s
in %s()
Explanation An MTS API returned an error while RPM was sending an MTS message.
Parameters: Error, RPM Function ...
Recommended Action No action is required.
Error Message RPM-3-LIC_CHECKIN_FAILED Format: %s failed with error - %s (0x%08x)
- in %s()
Explanation The system has detected a licensing problemAPI failed to check in a license.
Parameters: Failed API, Error, Error Code, RPM Function ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message RPM-3-LIC_CHECKOUT_FAILED Format: %s failed with error - %s (0x%08x)
- in %s()
Explanation The system has detected a licensing problemAPI failed to check out a license.
Parameters: Failed API, Error, Error Code, RPM Function ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message RPM-3-LIC_REG_FAILED Format: %s failed with error - %s (0x%08x) - in
%s()
Explanation The system has detected a licensing problemAPI failed while registering for license
change notifications.
Parameters: Failed API, Error, Error Code, RPM Function ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.