Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-581
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
RPM Messages
Error Message RPM-3-LOAD_PARSE_TREE Format: %s failed with error - %s (0x%08x) - in
%s()
Explanation API failed to load parse tree for PBR commands.
Parameters: Failed API, Error, Error Code, RPM Function ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message RPM-3-MTS_DROP Format: Error returned from mts_drop(), errno: %s
(0x%08x) in %s()
Explanation An MTS API returned an error when RPM tried to drop a message
Parameters: Error, Error Code, RPM Function ...
Recommended Action No action is required.
Error Message RPM-3-MTS_RECV Format: Error returned from tsp_mts_recv(), errno: %s
(0x%08x) in %s()
Explanation An MTS API returned an error while RPM was receiving on an MTS queue
Parameters: Error, Error Code, RPM Function ...
Recommended Action No action is required.
Error Message RPM-3-MTS_SEND Format: Error returned from mts_send(), errno: %s
(0x%08x) in %s()
Explanation An MTS API returned an error while RPM was sending an MTS message
Parameters: Error, Error Code, RPM Function ...
Recommended Action No action is required.
Error Message RPM-3-UNLOAD_PARSE_TREE Format: %s failed with error - %s (0x%08x) -
in %s()
Explanation API failed to unload parse tree for PBR commands.
Parameters: Failed API, Error, Error Code, RPM Function ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English