EasyManuals Logo

Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Cisco AP775A - Nexus Converged Network Switch 5010
886 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #678 background imageLoading...
Page #678 background image
Send document comments to nexus7k-feedback-doc@cisco.com
2-640
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SVC Messages
Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_DATA_CORRUPT ) Node
data corrupted - node rejected from cluster [chars]
Explanation Node data is readable but corrupted. The node has been rejected from the cluster.
Recommended Action 1. Re-install the code on the node. The node will have to be removed and
re-added back to the cluster. 2. Ensure that the software is at the latest level on the cluster. If not,
upgrade the cluster and if necessary repeat step 1 with the latest level of code. 3. If the error
continues, ask IBM Product Support for assistance. It may be necessary to replace the Caching
Services Module.
Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_DATA_UNREADABLE ) Node
data unreadable - node rejected from cluster [chars]
Explanation Node data could not be read. The node has been rejected from the from cluster.
Recommended Action 1. Re-install the code on the node. The node will have to be removed and
re-added back to the cluster. 2. Ensure that the software is at the latest level on the cluster. If not,
upgrade the cluster and if necessary repeat step 1 with the latest level of code. 3. If the error
continues, ask IBM Product Support for assistance. It may be necessary to replace the Caching
Services Module.
Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_HDW_CONFIG ) Processor
not valid [chars]
Explanation The node has detected unexpected differences in the processor vital data.
Recommended Action Reload the node. If the problem persists, replace the Caching Services Module.
Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_MEM_SIZE ) Memory size
error [chars]
Explanation The detected memory size does not match the expected memory size for the cluster.
Recommended Action A memory module on the Cisco MDS 9000 Caching Services Module is
probably faulty. Reload the node. If the error persists, replace the Caching Services Module.
Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_MISSING_RES ) Unable
to form a cluster due to lack of cluster resources [chars]
Explanation The node is unable to locate sufficient other nodes in the cluster and/or \ the quorum
disk controller needed in order to form a cluster.
Recommended Action Check the status of the quorum disk controller and the other nodes in the
cluster. If the quorum disk has failed, perform the problem determination procedures for the disk \
controller. Otherwise perform problem determination on the missing nodes and network.

Table of Contents

Other manuals for Cisco AP775A - Nexus Converged Network Switch 5010

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco AP775A - Nexus Converged Network Switch 5010 and is the answer not in the manual?

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General IconGeneral
BrandCisco
ModelAP775A - Nexus Converged Network Switch 5010
CategorySwitch
LanguageEnglish

Related product manuals