Send document comments to nexus7k-feedback-doc@cisco.com
2-838
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ZONE Messages
Error Message ZONE-2-ZS_LIC_FAILURE: License [chars] operation failed for license
[chars]
Explanation License [char] operation failed for license [char].
Recommended Action No action is required.
Error Message ZONE-2-ZS_LICENSE_UNAVAIL: License:[chars] unavailable, removing LUN
members, read-only attribute and re-activating active zonesets on all affected
VSANs
Explanation License:[char] unavailable, removing LUN members, read-only attribute and
re-activating active zone sets on all affected VSANs.
Recommended Action No action is required.
Error Message ZONE-2-ZS_LUN_DISABLING_FAILED: license expiry handling failed for
VSAN [dec]
Explanation License expiry handling failed for VSAN [dec].
Recommended Action No action is required.
Error Message ZONE-2-ZS_LUN_MEMBER_LIMIT_EXCEEDED: The limit for maximum number of
lun members exceeded
Explanation The number of LUN members configured has exceeded the maximum number of LUN
members allowed across all VSANs Due to this, distRIBution or merge operation may fail.
Recommended Action Make sure the number of LUN members is less than the maximum allowed
across all VSANs.
Error Message ZONE-2-ZS_MALLOC_FAILURE: Memory allocation failed for size [dec]
Explanation Memory allocation is failed for size [dec] bytes.
Recommended Action Restart the process.
Error Message ZONE-2-ZS_MEMBER_LIMIT_EXCEEDED: The limit for maximum number of
members exceeded
Explanation The number of members configured has exceeded the maximum number of members
allowed across all VSANs Due to this, distRIBution or merge operation may fail.
Recommended Action Make sure the number of members is less than the maximum allowed across
all VSANs.
To Next Page
Loading...
Need help?
General
