Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-839
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ZONE Messages
Error Message ZONE-2-ZS_MERGE_ADJ_NO_RESPONSE: Adjacent switch not responding,
isolating interface [chars]
Explanation The interface [chars] isolated due to adjacent switch not responding to Zone Server
requests.
Recommended Action Flap the interface.
Error Message ZONE-2-ZS_MERGE_FAILED: Zone merge failure, isolating interface
[chars] [chars]
Explanation The interface [chars] isolated due to zone merge failure. error [chars].
Recommended Action Compare active zone set with the adjacent switch OR use zone merge interface
[interface] {import/export} VSAN [VSAN-num] command.
Error Message ZONE-2-ZS_MERGE_FULL_DATABASE_MISMATCH: Zone merge full database
mismatch on interface [chars]
Explanation Full zoning databases are inconsistent between two switches connected by interface
[chars]. Databases are not merged.
Recommended Action Compare full zoning database with the adjacent switch, correct the difference
and flap the link.
Error Message ZONE-2-ZS_MERGE_UNKNOWN_FORMAT: Unknown format, isolating interface
[chars]
Explanation The interface [chars] isolated due to unknown format in merge request.
Recommended Action Set the interoperability mode to same value on both switches.
Error Message ZONE-2-ZS_MTS_OPER_FAILED: MTS [chars] operation failed : [chars]
Explanation Zone Server MTS [chars] operation failed : [chars].
Recommended Action No action is required.
Error Message ZONE-2-ZS_PORT_SWAP_FAILURE: Port swap operation failed
Explanation Port swap operation failed.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English