Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-840
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ZONE Messages
Error Message ZONE-2-ZS_PSS_VER_MISMATCH: PSS version mismatch URL: [chars]
(expected [chars], got [chars])
Explanation Configuration version mismatch. PSS URL [chars]. Expected version [chars], stored
version [chars].
Recommended Action Upgrade/Downgrade to expected version.
Error Message ZONE-2-ZS_TCAM_BROADCAST_ZONE_DISABLED: Broadcast zoning disabled :
Reason: Hard zoning disabled
Explanation Broadcast zoning disabled : Reason: Hard zoning disabled due to TCAM programming
failure.
Recommended Action No action is required.
Error Message ZONE-2-ZS_TCAM_LUN_ZONING_DISABLED: LUN zoning disabled : Reason:
Hard zoning disabled
Explanation LUN zoning disabled : Reason: Hard zoning disabled due to TCAM programming
failure.
Recommended Action No action is required.
Error Message ZONE-2-ZS_TCAM_PROGRAMMING_FAILED: TCAM operation failed : [chars],
Reason: [chars]
Explanation TCAM Programming failure has occurred : [chars]. [chars] is the reason for failure.
Recommended Action No action is required.
Error Message ZONE-2-ZS_TCAM_READ_ONLY_ZONE_DISABLED: Read-only zoning disabled :
Reason: Hard zoning disabled
Explanation Read-only zoning disabled : Reason: Hard zoning disabled due to TCAM programming
failure.
Recommended Action No action is required.
Error Message ZONE-2-ZS_TCAM_SWITCHED_TO_SOFT_ZONING_MODE: Switched to soft zoning
: Reason: Hard zoning disabled
Explanation Switched to soft zoning : Reason: Hard zoning disabled due to TCAM programming
failure.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English