Send document comments to nexus7k-feedback-doc@cisco.com
2-57
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
BGP Messages
Error Message BGP-3-RESTARTTYPE Format: Error in learning restart type
Explanation An internal software error occurred.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message BGP-3-RNHCB Format: RNH %s error: %s
Explanation An internal software error occurred.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message BGP-3-RPMBIND Format: RPM policy bind failed for %s %s
Explanation An unexpected but recoverable event has occurred.
Parameters: Policy type, Policy name ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message BGP-3-RPMHANDLE Format: RPM notification handle does not match
existing handle for policy %s
Explanation An unexpected but recoverable event has occurred.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message BGP-3-SENDBUF Format: Error manipulating sendbuf: %s
Explanation An internal software error occurred.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message BGP-3-SNMP_API_DATA Format: Message data is NULL
Explanation An SNMP message does not have enough memory to store data.
Recommended Action No action is required.