MCE iControl User Manual

iView - Controller View
9-132 Manual # 42-02-7223
• This Car Alternate: Input from the smoke sensors located in the hoistway or machine
room if the machine room is located at the main recall floor and if the car has any
equipment in that hoistway or machine room. Activation of sensors will initiate recall
to the alternate recall floor and cause the fire warning indicator in the car to flash.
• This Car Main: Input from the smoke sensors located in the hoistway or machine room
if the machine room is at any floor other than the main recall floor and if the car has
any equipment in that hoistway or machine room. Activation of sensors will initiate
recall to the main recall floor and cause the fire warning indicator in the car to flash.
•Front Door
• Disable Front Hall Door Buttons: Input used to disable the front hall door buttons.
• Front Aux Door Close Button: Input from the front auxiliary door close button:
• Front Aux Door Hold Button: Input from the front auxiliary door hold button.
• Front Aux Door Open Button: Input from the front auxiliary door open button.
• Front Aux Door Stop Button: Input from the front aux door stop button (active low).
• Front Constant Pressure Close: Activation overrides front door close software settings.
• Front Constant Pressure Open: Activation overrides front door open software settings.
• Front Hall Door Close Button: Input from a front hall door close button.
• Front Hall Door Hold Button: Input from a front hall door hold button.
• Front Hall Door Open Button: Input from a front hall door open button.
• Front Hall Door Stop Button: Input from a front hall door stop button (active low).
• Front Main Door Close Button: Input from the front main door close button.
• Front Main Door Hold Button: Input from the front main door hold button.
• Front Main Door Open Button: Input from the front main door open button.
• Front Main Door Stop Button: Input from front main door stop button (active low).
• Front Momentary Pressure Close: Overrides front door close software setting.
• Front Momentary Pressure Open: Overrides front door open software setting.
• Front Photo Eye Cut Out: Input from a front key switch - disables photo eye operation
• Rear Door
• Disable Rear Hall Door Buttons: Input used to disable the rear hall door buttons.
• Rear Aux Door Close Button: Input from the rear auxiliary door close button:
• Rear Aux Door Hold Button: Input from the rear auxiliary door hold button.
• Rear Aux Door Open Button: Input from the rear auxiliary door open button.
• Rear Aux Door Stop Button: Input from rear auxiliary door stop button (active low).
• Rear Constant Pressure Close: Activation overrides rear door close software settings.
• Rear Constant Pressure Open: Activation overrides rear door open software settings.
• Rear Door Close Limit: Input from rear Door Close Limit switch.
• Rear Door Open Limit: Input from rear Door Open Limit switch.
• Rear Door Photo Eye: Input from rear door photo eye.
• Rear Door Safe Edge: Input from rear door safe edge.
• Rear Hall Door Close Button: Input from a rear hall door close button.
• Rear Hall Door Hold Button: Input from a rear hall door hold button.
• Rear Hall Door Open Button: Input from a rear hall door open button.

MCE iControl Specifications

General

Brand	MCE
Model	iControl
Category	Controller
Language	English