3.
Do any of the following as needed.
•
Tap a well, then tap View to view the raw, EPT, or analyzed electropherogram for a well.
•
Tap (Information) to display the details for the well.
•
Tap (Filter), then enter a keyword such as the well number to filter the results (by Well ID
and Sample name attributes) that are listed.
•
Tap the Result group tab to list the wells by results group.
•
Tap a well, then tap Actions, then select an option to export the results or the run log.
For more information, see:
•
“Sample QC and quality alerts” on page 172
•
“Sequence analysis results” on page 175
•
“Fragment analysis results” on page 179
•
“Results Groups library” on page 301
Export results from the instrument—Results and data files,
logs, and reports
1.
In the home screen, tap 4Actions4Run history.
2.
Select one or more plates from the Run History table.
3.
Tap Actions.
4.
Tap the item to export:
•
Run results folder—Contains:
–
Fragment analysis—FSA (data) and CSV (sizing) file for each sample
–
Sequencing—AB1 file for each sample
–
PSM (plate) file
–
(Sequencing only) ZIP file that contains FASTA, PHD.1, and QUAL files for each sample
Results folder name format: PlateName_StartRunDate_timestamp
•
Logs (ZIP)—Contains the run results, auto-spectral calibration information, injection logs, PSM
plate file, CID raw data files, EPT information, and post-processing files.
Log file name format: PlateName_date_UniqueID.zip, for example:
Plate_20201021_121952.pdf
•
Report (PDF)—Contains the results of the plate run.
Report file name format: InstrumentName_PlateName_StartRunDate_timestamp.pdf,
for example: Instrument1_Plate_20201021_121952.pdf
5.
Select an export location, then tap Next.
IMPORTANT! P
erform a virus scan on a USB drive before inserting it into a port on the
instrument.
Chapter 7 View results on the instrument
Export results from the instrument—Results and data files, logs, and reports
7
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
171
To Next Page
Loading...
