Get started
■
Sign in .............................................................................. 53
■
Profile and sign in options ............................................................. 55
■
Workflow: Create a plate, start and monitor a run, then view results ......................... 62
■
Prepare the instrument ................................................................ 64
Sign in
A profile is required to sign in to the instrument.
Note: If you do not have a profile, see one of the following sections:
·
If you are not using the instrument with Thermo Fisher
™
Connect, see “Create a local profile (one time
only)” on page 29.
·
If you are using the instrument with Thermo Fisher
™
Connect, see “(Recommended) Link directly to
your Thermofisher.com account” on page 217.
If the SAE Sign in screen is displayed instead of the Sign in screen, see “Sign in to the instrument with
SAE enabled” on page 244.
1.
In the home screen, tap (Profile).
If user initials are displayed instead of (Profile), see “Sign in (if another user is signed in)” on
page 34.
2
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
53
To Next Page
Loading...
