Sign in to the instrument with SAE enabled
This procedure requires an SAE account.
1.
If another user is signed in, tap the user initials, then tap Sign out.
2.
In the home screen, tap .
3.
In the Sign in scr
een, tap Sign in, enter your SAE user name and password, then tap Sign in.
Note: When SAE mode is enabled, you cannot sign in with your local profile. Only an administrator
can sign in with a local profile. The only functions that are available to a local administrator are the
About and SAE functions on the Settings screen.
Chapter 10 Use the instrument with the Security, Auditing, and E‑signature (SAE) v2.1 module
Sign in to the instrument with SAE enabled
10
244
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
To Next Page
Loading...
