Thermo Scientific appliedbiosystems SeqStudio Flex Series - Annual Planned Maintenance Tasks; As-Needed Instrument Maintenance Tasks

(continued)
Task
For information, see
Clean the polymer delivery pump.
Note: If the polymer type was changed within the month, this
procedure can be skipped. The wizard that is used to change the
polymer type automatically performs the wash pump and channels
procedure.
“Wash the pump chamber and channels
(wizard)” on page 379
Flush the water trap. “Flush the water trap (pump trap)” on
page 379
Annual planned maintenance tasks
Contact your support representative to schedule annual planned maintenance. For information, see
“Use Smart Help to request assistance from Technical Support or Instrument Service” on page 473.
IMPORTANT! F
ailure to perform planned maintenance can aect instrument performance.
As-needed instrument maintenance tasks
Task
For information, see
Perform an install run. “Perform an install run” on page 328
Remove dried polymer from the capillary tips with a lint-free tissue
moist
ened with deionized water.
“Clean the instrument” on page 361
Empty the oven condensation reservoir. “Instrument interior components” on page 21
Chapter 13 Maintain the Instrument
Maintenance schedule
13
358
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide