Hi‑Di
™
Formamide storage and usage
Formamide is an injection solvent that is used to prepare samples. It is not a consumable that is
installed on the instrument as are the other consumables listed in this section. It does not include an
RFID tag on the label.
Cat. No. Description Storage
[1]
4401457 5 mL –25°C to –15°C
If frequent sampling is required, dispense and freeze small aliquots
of Hi‑Di
™
Formamide. To preserve quality, minimize freeze-thaw
cycles and exposure to air and room temperature. Use of Hi‑Di
™
Formamide after 8 freeze/thaw cycles has not been validated.
4440753
4 × 5 mL
4311320 25 mL
[1]
S
ee the expiration date on the label. Do not use expired product.
About the SeqStudio
™
Flex Series Instrument Software v1.0
The SeqStudio
™
Flex Series Instrument Software v1.0 is the on-instrument, integrated touchscreen
software that runs the SeqStudio
™
Flex Series Genetic Analyzer.
The software includes the following features:
•
Complete workflow, from plate file setup to review of primary analysis results
•
Intuitive display of sample quality, run notifications, and consumables status
•
4-plate capacity, with interactive plate loading during runs
•
Ability to prioritize the order of injections and plates
•
Automated barcode workflow with the internal barcode reader and optional user-supplied external
USB barcode reader
•
Enhanced results accuracy with spectral autocalibration during every run
•
Libraries to allow reuse of plate files, injection protocols, and other elements that are required to run
plates
•
On-instrument learning aids and assistance:
–
On-instrument tutorial videos with additional videos available on www.thermofisher.com
–
Demonstration mode that allows use of most features (see “Enable and set up Demo mode” on
page 457)
–
Step-by-step wizards for instrument maintenance procedures
–
Smart help and remote session features to request and obtain assistance from Technical
Support (requires connection to Thermo Fisher
™
Connect)
•
Optional connection to Thermo Fisher
™
Connect to access additional features:
–
Voice commands
–
Remote plate file creation
–
Data storage on the cloud
–
Remote run monitoring from the cloud or a mobile device
–
Automated cloud analysis with Thermo Fisher Scientific sequencing and fragment analysis
cloud apps
Chapter 1 P
roduct information
About the SeqStudio
™
Flex Series Instrument Software v1.0
1
28
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
To Next Page
Loading...
